top of page

Please use the purchase link to be directed to the Armoloq

e-commerce site.

TPA-891 B


The TPA pack frame provides a modular platform for configuring your Yaesu FT-891 into a quickly deployable base, mobile, field or mil style man pack configuration.


The concept was to design an effective, small form factor frame that when installed, would allow relocation of all rear inputs, minus power and ACC connection, to the front of the radio, provide standoff at the rear of the radio for permanent cable attachment, and also provide protection when used in the field.  The pack frame also allows for the detachment of the control head without removal of the frame so it can be easily setup for remote mounting scenarios.


The relocation mounts provide a sturdy mounting point for attaching commercial or mil type VHF/UHF whip antennas. All accessory mounts are interchangeable and can be oriented to suit your operating situation.


The TPA pack frame is a 2 piece frame that is secured to the radio via the 4 side chassis mounting holes.  The frame is CNC laser cut from 5052 aluminum and powder coated with a matte black finish.  The TPA provides protection to the radio body and control head with a wrap around design while allowing access to all controls.



Length -  12.750 in

Depth  -   2.500 in

Relocation Mounts are 1 inch in depth and will add an additional 1-2 inches to overall depth, depending on placement. 


Frame- 5052 aluminum, 1/8"

Relocation mounts- 6061 aluminum

Weight, approx.- 1.290 lbs, fully dressed with all package options

Finish- powder coat, matte black

Basic package includes the following-

TPA-891B, 2 piece pack frame


M4-0.7 x 10mm socket head screws- 4, these mounting screws are the appropriate length to avoid damaging the radio's internals.  Not to be installed without TPA pack frame.

*Included in the hardware pack are 2 additional washers.  In order to maintain the ability to remove the control head while the TPA is installed, you’ll need to place these 2 washers between the TPA and radio body on the VFO side.  The TPA should not be installed without these 2 washers in place as they prevent lateral pressure from being applied to the control head.


Relocation mount- 1, and mounting hardware

BNC female bulkhead connector- 1


Base Package Price-   $145.00


Additional Packages Available

1. Data package includes the following-

   6 pin mini DIN female to male cable, 1ft- 1

   Relocation mount- 1, and mounting hardware

Data Package Price-   +$25.00

2. CW/Speaker package includes the following-

   3.5mm audio, female to male cable, 1ft- 1

   Relocation mount- 1, and mounting hardware

CW/Speaker-      +$25.00

Shipping- USPS to CONUS locations and includes handling and insurance- shipping will be calculated based on your zip code


OCONUS orders- please use the Contact Form to provide shipping information and a shipping quote will be emailed to you.

Designed and Made in america

US flag, reversed subdued.jpg
bottom of page